mirror of
https://github.com/ppy/osu.git
synced 2024-11-18 08:52:54 +08:00
5fde4f2c0c
Changes to lifetime calculation in scrolling rulesets introduced in #7367, which aimed to account for the distance between hit objects' origin and its edge entering the scrolling area, fixed some issues with hitobjects appearing abruptly, but also regressed some other scenarios. Upon investigation, the regression was localised to the overlapping scroll algorithm. The reason for this was two-fold: * The previous code used TimeAt() to calculate the time of travel from the hit object's edge to its origin. For other algorithms, that time can be accurately reconstructed, because they don't have periods of time where there are multiple hit objects scrolling at different velocities. That invariant does not hold for the overlapping algorithm, therefore it is possible for different values to be technically correct for TimeAt(). However, the only value that matters for the adjustment is the one that's indicated by the control point that applies to the hit object origin, which can be uniquely identified. * Additionally, the offset returned (even if correct) was applied externally to the hit object's start time and passed to GetDisplayStartTime(). In the overlapping algorithm, the choice of control point used in GetDisplayStartTime() is important, since the value of the speed multiplier is read within. Externally rewinding the hit object's start time meant that in some cases the speed multiplier of the *previous* control point is applied, which led to hit objects appearing too late if the scrolling rate decreased. Because of the above, modify GetDisplayStartTime() to take the offset into account in all algorithms, and apply the adjustment correctly inside of them. The constant and sequential algorithms needed no adjustment from the previous logic, since: * the constant algorithm disregarded control points, and * the sequential algorithm would effectively rewind to time = 0, calculate the absolute distance from time = 0 to the hit object start, apply the origin offset *to the absolute distance*, and then convert back to time, applying all control points in sequence. Due to this it was impossible for control points to get mixed up while calculating. As for the overlapping algorithm, the high-level logic is as follows: * The distance that the origin has to travel is the length of the scroll plus the distance from the origin to the object edge. * The above distance divided by the scroll length gives the relative scroll lengths that the object has to travel. * As one relative scroll length takes one time range, the relative travel length multiplied by the time range gives the absolute travel time of the object origin. * Finally, the control point multiplier applicable at origin time is applied to the whole travel time. Correctness of the above is demonstrated by visual tests added before and headless unit tests of the algorithms themselves. The sequential scroll algorithm was not covered by unit tests, and remains uncovered due to floating-point inaccuracies that should be addressed separately.
64 lines
2.3 KiB
C#
64 lines
2.3 KiB
C#
// Copyright (c) ppy Pty Ltd <contact@ppy.sh>. Licensed under the MIT Licence.
|
|
// See the LICENCE file in the repository root for full licence text.
|
|
|
|
using NUnit.Framework;
|
|
using osu.Game.Rulesets.UI.Scrolling.Algorithms;
|
|
|
|
namespace osu.Game.Tests.ScrollAlgorithms
|
|
{
|
|
[TestFixture]
|
|
public class ConstantScrollTest
|
|
{
|
|
private IScrollAlgorithm algorithm;
|
|
|
|
[SetUp]
|
|
public void Setup()
|
|
{
|
|
algorithm = new ConstantScrollAlgorithm();
|
|
}
|
|
|
|
[Test]
|
|
public void TestPointDisplayStartTime()
|
|
{
|
|
Assert.AreEqual(-8000, algorithm.GetDisplayStartTime(2000, 0, 10000, 1));
|
|
Assert.AreEqual(-3000, algorithm.GetDisplayStartTime(2000, 0, 5000, 1));
|
|
Assert.AreEqual(2000, algorithm.GetDisplayStartTime(7000, 0, 5000, 1));
|
|
Assert.AreEqual(7000, algorithm.GetDisplayStartTime(17000, 0, 10000, 1));
|
|
}
|
|
|
|
[Test]
|
|
public void TestObjectDisplayStartTime()
|
|
{
|
|
Assert.AreEqual(900, algorithm.GetDisplayStartTime(2000, 50, 1000, 500)); // 2000 - (1 + 50 / 500) * 1000
|
|
Assert.AreEqual(8900, algorithm.GetDisplayStartTime(10000, 50, 1000, 500)); // 10000 - (1 + 50 / 500) * 1000
|
|
Assert.AreEqual(13500, algorithm.GetDisplayStartTime(15000, 250, 1000, 500)); // 15000 - (1 + 250 / 500) * 1000
|
|
Assert.AreEqual(19000, algorithm.GetDisplayStartTime(25000, 100, 5000, 500)); // 25000 - (1 + 100 / 500) * 5000
|
|
}
|
|
|
|
[Test]
|
|
public void TestLength()
|
|
{
|
|
Assert.AreEqual(1f / 5, algorithm.GetLength(0, 1000, 5000, 1));
|
|
Assert.AreEqual(1f / 5, algorithm.GetLength(6000, 7000, 5000, 1));
|
|
}
|
|
|
|
[Test]
|
|
public void TestPosition()
|
|
{
|
|
Assert.AreEqual(1f / 5, algorithm.PositionAt(1000, 0, 5000, 1));
|
|
Assert.AreEqual(1f / 5, algorithm.PositionAt(6000, 5000, 5000, 1));
|
|
}
|
|
|
|
[TestCase(1000)]
|
|
[TestCase(10000)]
|
|
[TestCase(15000)]
|
|
[TestCase(20000)]
|
|
[TestCase(25000)]
|
|
public void TestTime(double time)
|
|
{
|
|
Assert.AreEqual(time, algorithm.TimeAt(algorithm.PositionAt(time, 0, 5000, 1), 0, 5000, 1), 0.001);
|
|
Assert.AreEqual(time, algorithm.TimeAt(algorithm.PositionAt(time, 5000, 5000, 1), 5000, 5000, 1), 0.001);
|
|
}
|
|
}
|
|
}
|